DULUX Wash&Wear + PLUS Kitchen & Bathroom Low Sheen 4L
Now delivering to all major cities in Australia!
Remote Areas may need additional charge*
Dulux Wash&Wear +Plus Kitchen & Bathroom Low Sheen is made with the hard wearing, stain and mark resistant 101 Barrier Technology, fortified with a powerful mould-inhibitor. This gives ultimate washability and lasting protection to rooms with damp and humid conditions such as kitchens, bathrooms and laundries. Vivid White only.
Features
- 10 year guarantee against mould growth
- The 101 Barrier Technology provides superior washability
- Low Odour and Low VOC
- Water-based (Acrylic)
Benefits
- Resists the growth of mould
- Can endure frequent cleaning
- Walls look fresh for years
- Easy application
- Fast drying
Performance Guide
| VOC Properties | < 16 g/L tinted & untinted |
| Gloss Level Indicator | 10 |
| Weatherability | Not recommended for exterior use |
| Heat Resistance | Softens and sticks to other painted surfaces over 70C |
| Water Resistance | Suitable for use in wet areas |
| Abrasion Resistance | Good wet and dry burnish resistance and stain removal |
| Solvent Resistance | Sensitive to aromatic hydrocarbons and alcohols |
| Green Star | Complies with the requiremenrs for the Indoor Environment Quality credit in Green Star Australia rating tools |
Application
Roller, Brush, Spray.
Coverage - 16 sq. meters/ L
Surface Preparation
Ensure all surfaces are clean and dry prior to application. Brush down to remove dust. Previously Painted Surfaces: Wash down with sugar soap solution and rinse with clean water to remove any dirt, oil or grease. In cases where mould or mildew is present, use a household bleach solution. Dilute 1 part bleach with 3 parts clean water. Wear gloves and goggles. Use a scouring pad wet with bleach solution to lightly abrade the surface and ensure physical removal of stubborn areas of mould growth. Leave the bleach solution on the surface for 15 minutes, then thoroughly remove by washing down with clean water and wipe dry. In very severe cases, repeat this action to remove all mould. Surfaces must be sanded to remove loose, peeling, flaking or chalky paint. Sand all gloss and semi gloss surfaces to a dull finish and wipe down with a damp cloth to remove surface dust. Apply one coat of Dulux Acrylic Sealer Undercoat or Dulux 1Step© Acrylic Primer Sealer Undercoat to any areas that have been repaired or which have an uneven gloss level.
Cracks or holes with filler: Spot prime repairs with Dulux 1 Step© Water Based
Glossy surfaces: Lightly sand to a dull finish
Unpainted plasterboard, brick, cement: One coat of Dulux 1 Step© Water Based
Bare timber: One coat of Dulux 1 Step© Water Based
Set plaster, fibrous plaster, plasterglass: One coat of Dulux Sealer Binder
Treating Existing Mould
Remove mould with Selleys© Rapid Mould Killer or by scrubbing with a scouring pad and bleach solution (1 part bleach to 3 parts water). Leave solution on the surface for 15 minutes then wash with clean water and wipe dry. Several applications may be necessary to remove stubborn mould blooms.
Clean-Up
Clean up with water.
Uses
Dulux Wash&Wear +Plus Kitchen & Bathroom Low Sheen is created using Dulux's hard-wearing, stain and mark resistant 101 Barrier Technology, strengthened with a powerful mould-inhibitor. This gives ultimate wash-ability and lasting protection to rooms with damp and humid conditions such as laundries, bathrooms and kitchens.
Further Product Information: Product Datasheet & MSDS
No posts found