Taubmans Combo Project Prep and Paint (free delivery) Special

  Taubmans Combo Protect+Prep+Paint We have selected the best product for your next painting project.  Please select colour and press button the rest will do! Best at this time to paint your property!     Taubmans Endure Low Sheen White Interior Wall Paint Low SheenIdeal for all interior walls. Gloss Level 5-10%       Surface Preparation Ensure surfaces to be painted are clean, dry and free of contamination. Walls should be wiped down with a mild detergent and rinsed clean with fresh water, even if they don't appear to be dirty, to ensure removal of any surface contamination and ensure the paint has a clean surface to adhere to.   New Work Seal new or bare plaster with Taubmans Prep Right Plaster Sealer. Seal bare wallboards or Gyprock with Taubmans Ultraprep or Taubmans 3 in 1.   Repaint Remove all loose or flaking paint, wash all areas thoroughly to remove any surface contamination. Treat surfaces affected by mould with chlorine bleach diluted one part bleach to four parts water. Rinse clean with fresh water. Spot repair any bare areas such as filled holes as per directions for new work.   Coats Apply two liberal coats by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.   Clean up Water wash up, away from drains.   Coverage Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.   Recoat Recoat after 2 hours at 25°C and 50% relative humidity.   Stirring Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.   Temperature Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.   ASTHMA COUNCIL APPROVED     8-IN-1 MULTI-BENEFIT PROTECTION PROVEN TO DELIVER SUPERIOR PROTECTION* WITH 8-IN-1 MULTI-BENEFIT PROTECTION: Wash resistant  Stain resistant Scrub resistant Anti-microbial Asthma & allergy friendly  Low VOC & odour Inhibits mould & mildew Nanoguard technology     BACTERIA SHIELD The advanced anti-microbial technology in the new Taubmans Endure Interior also sees it better equipped to protect homes against mould, mildew, and bacteria.   ADVANCED NANOGUARD TECHNOLOGY Taubmans Endure® Interior is engineered with Nanoguard Advanced Technology, which provides maximum protection for interior surfaces against everyday dirt and stains. The interlocking molecular structure utilises small and large particles to form a strong protective shield, so the surface can be cleaned without compromising the quality of the paint.    LOW VOC Improved indoor air quality is a strong feature of the new Endure Interior range, with low odour, and VOC* levels reduced to 16g/1L.