Taubmans Endure Matt White - 15L - Interior Wall Paint

Taubmans Endure Matt White Interior Wall Paint Matt Ideal for interior walls; an ultra-washable, stain resistant matt finish. Gloss level: 2-4%   Features Perfect  for interior walls. Ultra-washable and stain resistant 2% - 4% - Gloss level. Matt finish Anti- microbial and environmentally friendly Allergy-friendly Asthma-friendly Low VOC Hold back mould & mildew Nanoguard technology   Application process   Firstly prepare surface  Ensure surfaces to be painted are clean, dry and free of contamination. Walls should be wiped down with a mild detergent and rinsed clean with fresh water, even if they don't appear to be dirty, to ensure removal of any surface contamination and ensure the paint has a clean surface to adhere to.   New Work Seal new or bare plaster with Taubmans Prep Right Plaster Sealer. Seal bare wallboards or Gyprock with Taubmans Ultraprep or Taubmans 3 in 1.   Repaint Remove all loose or flaking paint, wash all areas thoroughly to remove any surface contamination. Treat surfaces affected by mould with chlorine bleach diluted one part bleach to four parts water. Rinse clean with fresh water. Spot repair any bare areas such as filled holes as per directions for new work.   Coats Apply two liberal coats by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.   Clean up Water wash up, away from drains.   Coverage Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.   Recoat Recoat after 2 hours at 25°C and 50% relative humidity.   Stirring Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.   Temperature Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.   ASTHMA COUNCIL APPROVED   8-IN-1 MULTI-BENEFIT PROTECTION Wash resistant  Stain resistant Scrub resistant Anti-microbial Asthma & allergy friendly  Low VOC & odour Inhibits mould & mildew Nanoguard technology     BACTERIA SHIELD The advanced anti-microbial technology to shield homes from mould/mildew, and bacteria.   ADVANCED NANOGUARD TECHNOLOGY  Helps fight everyday dirt and stains.   LOW VOC Indoor air quality is improved. VOC* levels lowered to 16g/1L.