Taubmans Water Based Enamel Semi Gloss White - 10L - New Product!
Taubmans Water Based Enamel Semi Gloss White
Features
Use it for doors, windows and trims.
Can be cleaned easily (shield the surface from sweat, cleaning agents and grease)
Long lasting
75% - 100% - Gloss level.
Anti- microbial and environmentally friendly
Allergy-friendly
Asthma-friendly
Premium Enamel product with the latest grease-resistant LTA+ Technology™.
Application Process
Firstly prepare surface
Clean and dry the surface.
Mould needs to be treated with bleach and rinsed with fresh water then.
All surface defects need to be filled with a suitable filler.
Using masking tape on wall and ceiling paints is not recommended.
Applying on new work
Apply Taubmans 3 in 1 once on surfaces such as timber, masonry and paper faced plasterboard.
If surfaces previously painted
All flaking and loose paint need to be removed. Then sand with fine paper surfaces. Prime before paint if it is necessary. Apply Taubmans 3 in 1 to make sure surfaces are even. Undercoat surfaces which were painted before.
Application steps
Check colour before use.
Applying two coats using a 4mm – 6mm (nap or pile length) roller or brush is recommended.
Put thin coats as a thick coat will cause runs to appear.
Use a roller if a large area needs to be painted.
Mix paint for 5 minutes before use
30 minutes is a Drying time (touch dry)
After 2 hours at 25°C and 4 hours in cold or humid areas Recoat
If temperatures below 10°C Do not paint
Covered area
Coverage depends on the surface roughness. Up to 16 m2 per litre.
SENSITIVE CHOICE
National Asthma Council Australia’s Sensitive Choice® Program approved the product.
LOW VOC
Indoor air quality is improved. VOC* levels lowered to 16g/1L.
LTA+ TECHNOLOGY™
Shield the surface from sweat, cleaning agents and grease and Long lasting.
Сообщения не найдены