Bondall Ranex Rustbuster 250ml

Bondall Ranex Rustbuster 250ml

Ranex Rustbuster converts rust from a detrimental oxide to a beneficial phosphate of iron, chemically destroying any rust present & leaving the surface in a suitable condition for painting when completely dry.

Surface Rust/ Tarnishing - removes rust spots, cleans & polishes stainless steel, chrome, brass & copper. Ideal for bikes & tools etc. Rusty parts can be soaked in Ranex.

Stain Remover/ Cleaner - Dissolves and cleans off bore water, rust and mineral stains from most internal and external surfaces - toilets, baths, basins, windows, walls, boats & other non-porous surfaces. Some brick surfaces perform better than others.

Features & Benefits

• Pentrates to chemically destroy rust
• Removes surface rust
• Cleans and polishes chrome, brass, copper etc.
• Dissolves & cleans off rust and borewater stains
• Cleans boats

Applications

• Rust Conversion
• Surface Rust/ Tarnishing
• Stain Remover/ Cleaner

*Note: avoid contact with vehicle paintwork, Colorbond, dry concrete, anti-fouling paint, marble & anodised or galvanised surfaces.

Rust Conversion

Remove oil, grease, paint and loose scale.

Apply Ranex & allow to dry completely in order to penetrate deep rust & to leave surface in a suitable condition for painting with an oil based primer. as Ranex chemically destroys rust it is not necessary to use rust inhibiting paints. Zinc rich paints are not recommended.

Apply Ranex to the rust effected areas only, wipe off any excess on surrounding metal or paintwork with a damp cloth.

- Note: Ranex Rustbuster will convert the rust however it will not prevent it from re-occuring. Treated surfaces left uncoated may experience further rusting.

Surface Rust and Tarnish Removal

Apply Ranex with a damp cloth, sponge or fine steel wool. Wipe off promptly & polish with a dry cloth - this application is ideal for restoring tools, chrome, stainless steel, brass, copper, bikes etc.

To soak rusty parts, leave for a few minutes & then check untill satisfactory. Wipe or wash off on completion.

Stain Remover & Cleaner

Apply Ranex, allow a few minutes to work & then wipe or hose off - do not allow to dry.

Deep seated stains may need further applications & aggitation with a brush or light scourer. spot testing recommended on paintwork & tinted gel-coat.

DS Ranex Rustbuster (79 kb)

MSDS Ranex Rustbuster (21 kb)